FreeTrack Forum - Components

Home

Welcome, you're not connected. ( Log in - Register )

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > Components

RSS > Components, Please confirm if I've chosen correctly

VOZzer	#1 11/07/2010 - 21h06 Top
Class : Apprenti Posts : 9 Registered on : 11/07/2010 Off line	Hello everyone, I have recently purchased my WebCam and IR LEDs for use with the FreeTrack Software. I intend to use the Software & Cap System with FSX. This is my WebCam, the Microsoft LifeCam VX-3000: http://www.microsoft.com/hardware/digitalcommunication/productdetails.aspx?pid=001 These are my chosen IR LEDs: http://www.maplin.co.uk/Module.aspx?ModuleNo=2253 I want to use 3 LEDs in a 6DOF configuration. Another question, I'm not sure if I've understood the manual correctly, but will placing two LEDs 30cms apart with one inbetween (thats 15cms between 3 LEDs) work with the Software? Finally, will all of what I want to achieve work sucessfully with FSX? Thanks alot, Jack
slaver1	#2 12/07/2010 - 01h08 Top
Class : Apprenti Posts : 49 Registered on : 08/02/2010 Off line	In case FSX read this topic: http://forum.free-track.net/index.php?showtopic=2174 ps3eye CLeye driver FIX for FreeTrack 2.2.0.279
VOZzer	#3 12/07/2010 - 11h55 Top
Class : Apprenti Posts : 9 Registered on : 11/07/2010 Off line	Hi Slaver, Thanks for the reply, I'll be sure to look into that when I start FSX. Could you aid me please on my remaining few questions? Thanks, VOZzer
slaver1	#4 12/07/2010 - 13h50 Top
Class : Apprenti Posts : 49 Registered on : 08/02/2010 Off line	This is my WebCam, the Microsoft LifeCam VX-3000: http://www.microsoft.com/hardware/digitalcommunication/productdetails.aspx?pid=001 These are my chosen IR LEDs: http://www.maplin.co.uk/Module.aspx?ModuleNo=2253 Camera and LEDs are ok. You need proper value resistor(s) to power source volatge and LED connection type (serial or paraler). Another question, I'm not sure if I've understood the manual correctly, but will placing two LEDs 30cms apart with one inbetween (thats 15cms between 3 LEDs) work with the Software? You can change model dimensions in freetrack so its not stick to 30, 15 etc. Generaly bigger model is more sensitive to head movement but big model also cut X Y translations. ps3eye CLeye driver FIX for FreeTrack 2.2.0.279
VOZzer	#5 12/07/2010 - 15h12 Top
Class : Apprenti Posts : 9 Registered on : 11/07/2010 Off line	Oh I understand. So the dimensions in the manual aren't necessarily "strict". They are reccommended but not modelling to these specifications won't cause any severe adverse side effects?
slaver1	#6 13/07/2010 - 14h09 Top
Class : Apprenti Posts : 49 Registered on : 08/02/2010 Off line	exactly First, you can make your model and then measure it. But it is recommended at least 30, 15 or more in proportional ps3eye CLeye driver FIX for FreeTrack 2.2.0.279
VOZzer	#7 13/07/2010 - 18h35 Top
Class : Apprenti Posts : 9 Registered on : 11/07/2010 Off line	Another question - When it is stated "The LED plane cannot get close to the WebCam Plane", how close is "close"?
VOZzer	#8 13/07/2010 - 23h52 Top
Class : Apprenti Posts : 9 Registered on : 11/07/2010 Off line	EDIT: Problem solved. I had missed the "Centre" button. Happy to report FreeTrack is working wonders on W7 64-Bit, Microsoft VX-3000 Cam and 6-DOF 3 LED condiguration!!! Edited by VOZzer on 14/07/2010 at 01h22.

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > Components

> Stats

2 user(s) connected during the last 10 minutes (0 member(s) and 2 guest(s)).