> PS3 Eye Fix?
|
|
|
camped69 |
|
Class : Apprenti
Posts : 2
Registered on : 10/09/2015
Off line
|
Hi All!
Any information on the PS3 Eye fix file? I cannot seem to find it.
Thanks!
|
|
Stormrider |
|
Class : Légende du Forum
Posts : 466
Registered on : 02/01/2013
Off line
|
Hi,
I have sent you a pm. 
regards Stormrider |
|
oxgard |
|
Class : Apprenti
Posts : 2
Registered on : 07/09/2015
Off line
|
can you send me that file also?
|
|
dcaplinger76 |
|
Class : Apprenti
Posts : 2
Registered on : 07/11/2015
Off line
|
I also have the Ps3 Eye Cam and have been searching for the fix. Any help would be greatly appreciated. Thanks, Dennis
|
|
brrrrang |
|
Class : Apprenti
Posts : 3
Registered on : 19/11/2015
Off line
|
ok guys... had the same problem as... probably anyone here  i googled "Freetrack2.2.0.279CLeyePatch" (including quotation marks) and found an archive on a russian facebook site... or something like that 
i tried it out and now i can finally use freetrack... awesome program btw... unfortunately it seems to be discontinued or something?  
anyways... i reuploaded the file for you... 'cause i don't want to see you suffer any longer 
http://www69.zippyshare.com/v/9wOBgkyy/file.html
btw wanted to use ft for elite dangerous... works just fine, but only with the opentrack workaround, which you probably already found here: http://forum.free-track.net/index.php?showtopic=4258
cheers and have fun fellers.
Edited by brrrrang on 21/11/2015 at 14h51. |
|
Stormrider |
|
Class : Légende du Forum
Posts : 466
Registered on : 02/01/2013
Off line
|
|
|
FSAviator |
|
Class : Apprenti
Posts : 6
Registered on : 06/12/2015
Off line
|
Hello! I bought the ps3 cam and got the cl driver. So in the CL test program, the camera works very fine. But everytime I try to use it on Free Track, Free Track crashes immediately. I tried different solution, but nothing helps. I installed also the free track Fix, recommended in this topic, but it does'nt helps... How can I get the PS3 cam working with Free Track?
I'm using Windows 7 64bit.
Thank you sooo, so much for helping!
Best Regards,
Sascha
|
|
Stormrider |
|
Class : Légende du Forum
Posts : 466
Registered on : 02/01/2013
Off line
|
You must check if you have the same fps setting in both freetrack and in that cl-test program..
Did you also change the dpi-scaling from normal to low?If you have it "normal" it also makes freetrack crash. |
|
FSAviator |
|
Class : Apprenti
Posts : 6
Registered on : 06/12/2015
Off line
|
Thanks! Where I can find the setting for the dpi rate? - Best Regards, Sascha
|
|
brrrrang |
|
Class : Apprenti
Posts : 3
Registered on : 19/11/2015
Off line
|
in the cl test program it's under options/video capture pin... i set it to 320x240 24 bits @125fps... set the same value in freetrack under 'stream' .... also you have to click on 'stream' to get ft to work before you start the camera.... or else ft will crash... well, at least for me it does
gl hf |
|
Stormrider |
|
Class : Légende du Forum
Posts : 466
Registered on : 02/01/2013
Off line
|
Look here for how to change the dpi-scaling.
http://www.sevenforums.com/tutorials/443-dpi-display-size-settings-change.html
http://forum.free-track.net/index.php?showtopic=3624&message=18540
There will always be a discussion about the fps you need for good tracking, the max I used was 75fps and 640x480.If 125fps could be better for you you must try and decide for your self.I have a 144hz monitor and I did not see any improvement. |
|
FSAviator |
|
Class : Apprenti
Posts : 6
Registered on : 06/12/2015
Off line
|
Okay, cool. Now with the ft stream settings 320x240px, 24bits @ 60FPS, ft don't crashes. BUT, everytime I restart ft, it jumps to the setting "320x240px, 32bits @ 60FPS" so I have to change it to 24 bits.
The bigger problem is, that ft don't get a stream from the webcam. The camera image on ft keeps black...
@Stormrider: Thank you very much. I've checked this, my Windows is already set to "small".
Regards, Sascha
|
|
Stormrider |
|
Class : Légende du Forum
Posts : 466
Registered on : 02/01/2013
Off line
|
did you also reed that post of "thagerty '?
http://forum.free-track.net/index.php?showtopic=3624&page=1#18540
He discribes exactly what and how to do it.If you follow what he says and the camera image is still black report back and we will try to figure out what could be wrong.
cheers Stormrider |
|
FSAviator |
|
Class : Apprenti
Posts : 6
Registered on : 06/12/2015
Off line
|
Thank you, Sormrider. If i try changing the camera settings, I get the following error message:
Access violation at address 779B2312 in module "ntdll.dll". Write of address 00000E3C.
Regards,
Sascha |
|
Stormrider |
|
Class : Légende du Forum
Posts : 466
Registered on : 02/01/2013
Off line
|
do you run freetrack in compability mode, admin and xp mode?
Try to reset the webcam settings to default.I get the same error when I put the exposure to high.
Did you know that freetrack is not the only ir-tracking software?
http://facetracknoir.sourceforge.net/home/default.htm
It is also for free and with the pointtracker plugin it works the same as freetrack. |
