FreeTrack Forum

Hello,

I have a problem with the way FreeTrack uses the autoload feature.
Unless I have done something wrong it only seems to load default profiles.
That would be okay if those profiles could be edited individually, but if I edit a default profile, all default profiles change and that defeats the purpose of autoloading.
Also FreeTrack doesn't seem to support autoloading of  custom made profiles.

Is there something I can do about this?

That would be okay if those profiles could be edited individually, but if I edit a default profile, all default profiles change and that defeats the purpose of autoloading.

you can make your own profile like this: click at "new" give it a name and you see it apear in the profile list under "default.Open the profile with the name you gave it and make the changes you want.
sometime someone shares a profile like this:
you have to copy from [Advance] .......Z=0
[Advanced]
Average=1
IgnoreBackwardZ=0
MaintainPausedData=0
RollRelativeRot=0
RelativeTransYaw=0
RelativeTransPitch=0
RelativeTransRoll=0
RelativeTransX=0
RelativeTransY=0
RelativeTransZ=0
[Sensitivity]
Yaw=19800
Pitch=15600
Roll=9900
X=9900
Y=9900
Z=2700
[Smoothing]
Yaw=200
Pitch=200
Roll=200
X=200
Y=200
Z=200
Zooming=1
SmoothStableMultiplier=25
SmoothRawMultiplier=25
Dynamic=1
[Inverted]
Yaw=0
Pitch=0
Roll=0
X=0
Y=0
Z=0
[AxisEnabled]
Yaw=1
Pitch=1
Roll=1
X=1
Y=1
Z=1
[AxisMap]
Yaw=0
Pitch=1
Roll=2
X=3
Y=4
Z=5
[YawCfg]
X0=0
Y0=102
X1=10
Y1=64
X2=355
Y2=64
X3=325
Y3=2
[PitchCfg]
X0=0
Y0=102
X1=137
Y1=50
X2=349
Y2=60
X3=320
Y3=2
[RollCfg]
X0=0
Y0=102
X1=11
Y1=41
X2=315
Y2=54
X3=320
Y3=2
[XCfg]
X0=0
Y0=102
X1=9
Y1=48
X2=181
Y2=21
X3=320
Y3=2
[YCfg]
X0=0
Y0=102
X1=17
Y1=44
X2=270
Y2=75
X3=320
Y3=2
[ZCfg]
X0=0
Y0=102
X1=15
Y1=47
X2=106
Y2=69
X3=320
Y3=2
[Output]
MouseX=0
MouseXEnabled=1
MouseY=1
MouseYEnabled=1
MouseWheel=0
MouseWheelEnabled=0
MouseAutoPan=0
MouseAbsolute=0
MouseWheelScale=50
PPJoyControllerNumber=1
FreeTrack=0
TIR=1
Mouse=0
PPJoy=0
Keys=0
SimConnect=0
FS=0
[Mapping]
Pause=Shift + 1
PauseBeep=0
PauseToggle=1
Center=Shift + 2
CenterBeep=0
CenterToggle=0
CustomCenterSet=Shift + 3
CustomCenterSetBeep=0
CustomCenterSetToggle=1
CustomCenterReset=Shift + 4
CustomCenterResetBeep=0
CustomCenterResetToggle=1
SmoothStable=Shift + 5
SmoothStableBeep=0
SmoothStableToggle=0
SmoothRaw=Shift + 6
SmoothRawBeep=0
SmoothRawToggle=0
Yaw=Ctrl + Shift + F1
YawBeep=0
YawToggle=0
Pitch=Ctrl + Shift + F2
PitchBeep=0
PitchToggle=0
Roll=Ctrl + Shift + F3
RollBeep=0
RollToggle=0
X=Ctrl + Shift + F4
XBeep=0
XToggle=0
Y=Ctrl + Shift + F5
YBeep=0
YToggle=0
Z=Alt + í
ZBeep=0
ZToggle=1
FreeTrack=Ctrl + Alt + F1
FreeTrackBeep=1
FreeTrackToggle=1
TIR=Ctrl + Alt + F2
TIRBeep=1
TIRToggle=1
Mouse=Ctrl + Alt + F3
MouseBeep=1
MouseToggle=1
Joystick=Ctrl + Alt + F4
JoystickBeep=1
JoystickToggle=1
Keymap=Ctrl + Alt + F5
KeymapBeep=1
KeymapToggle=1
SimConnect=Ctrl + Alt + F6
SimConnectBeep=1
SimConnectToggle=1
ProfileA=Ctrl + Alt + F6
ProfileABeep=1
ProfileAToggle=1
ProfileB=Ctrl + Alt + F6
ProfileBBeep=1
ProfileBToggle=1
ProfileC=Ctrl + Alt + F6
ProfileCBeep=1
ProfileCToggle=1
[OutputKeys]
YawThreshold=50
YawHold=1
YawPos=
YawNeg=
PitchThreshold=50
PitchHold=1
PitchPos=
PitchNeg=
RollThreshold=50
RollHold=1
RollPos=
RollNeg=
XThreshold=50
XHold=1
XPos=
XNeg=
YThreshold=50
YHold=1
YPos=
YNeg=
ZThreshold=50
ZHold=1
ZPos=
ZNeg=
[CustomCenter]
Yaw=0
Pitch=0
Roll=0
X=0
Y=0
Z=0

You just have to copy the text to notepad, save it and give it a name.Copy this file to the profilefolder in the freetrack install folder.Change the file extencion from  .txt to .fgp.
If you start freetrack you wil see you have a new profile

[quoteAlso FreeTrack doesn't seem to support autoloading of  custom made profiles[/quote]
In my case, always freetrack starts with the profile I last used.Auto load on or of it doesn't matter.So why it doesn't happen by you I don't know.

Stormrider @ 25/08/2013 - 13h25 a dit:

In my case, always freetrack starts with the profile I last used.Auto load on or of it doesn't matter.So why it doesn't happen by you I don't know.

Thanks for the reply, though what I wanted to explain is when autoload is on, FreeTrack only loads profiles from the default pool, which can't be edited individually, so when I change from playing IL-2 1946 to GTR 2 for example it uses the same settings.
With autoload off is uses the last profile whatever it was, custom or default.
But what I meant is that autoload isn't really useful at the moment.

Hi Blindasabat,

as far as I understand, it works by game ID numbers.

http://forum.free-track.net/index.php?showtopic=436&message=3656

So the way it should works is that you have to create a profile first and drag and drop the title from the default list in it.

The game ID numbers are fixed in the programs.ini.

I can't tell you if it works when you edit programs.ini with the game ID of GTR2.
I found: 49923
Try it out.

I made it like this.I rename one default profile to my game and deleted the others.