FreeTrack Forum - Problems using PS3 cam

Home

Welcome, you're not connected. ( Log in - Register )

FreeTrack Forum > FreeTrack : English Forum > Support : FreeTrack Software > Problems using PS3 cam

RSS > Problems using PS3 cam, FreeTrack Issues

SwiftyUKCX	#1 06/02/2013 - 23h03 Top
Class : Apprenti Posts : 5 Registered on : 28/01/2013 Off line	After setting everything up the Freetrack only seems to run on one resolution 640x480 32bit 75.000 Frames, any higher resolution crashes FreeTrack. Changing to not running. Anyway, on this Resolution its working BUT, Freetrack doesn't pick up my IR LED's properly, I can change the settings a little to see the 3 red blobs but the FreeTrack doesn't seem to pick them up in the right hand lower corner. It's kinda hard to explain as I am very new, in fact a first time user so I am adding a screen shot in the hope that someone can help. OR, Would it be easier to purchase another camera from the compatibility list, if so can anyone please recommend one that works with FreeTrack and is reasonably cheap please?? Many thanks SPECS Win 7 64 bit Ultimate OS 8Gig DDR3 RAM AMD 955 Quad Core 3.4Ghz O/C 3.6ghz FreeTrack Version 2.2.0.279 CL-Eye-Driver-5.3.0.0341 PS3 Camera IR Filter Removed 3 Point Headset PSH 435P 5mm IR LED's Powered Via USB I actually cannot get it working at all now, so perhaps if someone could advise me on which webcam works best with Freetrack IR. 13 hrs trying to sort this today!! Help
Steph	#2 07/02/2013 - 09h13 Top
Class : Moderator Posts : 656 Registered on : 16/11/2007 Off line	Hi, some questions: - Where is the sreenshot? - What resistor did you used, - What filter do you use? After setting everything up the Freetrack only seems to run on one resolution 640x480 32bit 75.000 Frames, any higher resolution crashes FreeTrack. Changing to not running. This is quit normal, but 75Frames are enough in any case. I think it's just a question of the right adjustments and filter combination.
SwiftyUKCX	#3 07/02/2013 - 14h39 Top
Class : Apprenti Posts : 5 Registered on : 28/01/2013 Off line	Hi Steph, Thanks for replying to my post, I didn't include any screenshot as I couldn't get FreeTrack working at that time, so there was in fact nothing to show you. I used a 0.68 ohms resistor and the filter in the camera is from the inside of a floppy disc. The IR LED's after checking them on the 'CL-Eye Test' seem to work fine, but not having used anything like this in the past I don't really know what to expect....... I have read many forum posts saying how good the PS3 camera was, which was why I used this one but..................after having so many problems I began to wonder if any other camera would give me the same grief?? I am going to try to re-install everything from scratch, use an earlier version of FreeTrack and use the 'hack' from here: http://forum.free-track.net/index.php?showtopic=2416 Incidently I followed this guide: http://www.maximumpc.com/article/how-tos/how_build_your_own_ir_head_tracker?page=0,1. Any suggestions would be warmly accepted.
Steph	#4 07/02/2013 - 15h53 Top
Class : Moderator Posts : 656 Registered on : 16/11/2007 Off line	I guess you mean the sfh485p with 6.8 Ohms?! As I couldn't find any data sheet for psh 435 p. So the mount seems to be ok. The PS3 cam is a good solution, even if many users often have driver issues, which finally is not your case, so I suggest to go on with this cam. Do you remove the Ir-filter from it? Some PS3 has lenses with ir filter coated on, so it's impossible to remove. The floppy filter is not a good filter solution as it blocks large parts of ir light too. Try others: http://forum.free-track.net/index.php?showtopic=3205&message=16902 http://forum.free-track.net/index.php?showtopic=3510&message=18022 http://forum.free-track.net/index.php?showtopic=3372&message=17843
SwiftyUKCX	#5 07/02/2013 - 16h22 Top
Class : Apprenti Posts : 5 Registered on : 28/01/2013 Off line	Hi again, I'm sorry giving you incorrect info, yes the LED's are sfh485P. The resistor I used was/is 8.2ohm 1/4 watt, The IR Filter/Lens inside the camera I completely removed. I will definitely try a different Filter as well, thankyou. A positive update on my situation. I un-installed the CL-Eye driver and rebooted, installed version 4.0.2.1017 CL-Eye driver. Installed the latest version of FreeTrack, V2.2.0.279, copied over the Hacked files for the PS3 Camera and now I have the FreeTrack software running. However its not picking up my IR LED's. I see the dots (blurred) for a second then the red light on the camera comes on and the image disappears. (All this happens in a split second) I will be tweaking the settings and see if I can get this running properly. If anyone is running a PS3 Camera and has any settings or advice they could pass on, it would be very welcomed. Many thanks. Edited by SwiftyUKCX on 07/02/2013 at 16h36.
SwiftyUKCX	#6 13/02/2013 - 14h38 Top
Class : Apprenti Posts : 5 Registered on : 28/01/2013 Off line	Got things working fine. For any other people who have problems just keep tweaking the settings and don't give up, if you have found someone here and it works for them then with the same components it can work for you. Those who helped many thanks.

FreeTrack Forum > FreeTrack : English Forum > Support : FreeTrack Software > Problems using PS3 cam

> Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).