FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS >  SFH485P vs. SFH487P
zeurminator #1 11/10/2007 - 14h08

Class : Apprenti
Posts : 1
Registered on : 11/10/2007

Off line

Hi,

I have question regarding IR-emitters.
The Osram SFH485P is recommended in the Freetrack handbook.
I have found another emitter in an online store: the Osram SFH487P
It has the same forward current and voltage specs as the SFH485P, but it is only 3mm. It has a large half angle of 65° ,which is pretty usefull for tracking I guess.

Has anyone any experience with this LED? Is a 3mm LED too small?

greetings, zeurminator
tristan68 #2 11/10/2007 - 14h26

Electronicien en chef
Class : Electronicien en chef
Posts : 651
Registered on : 10/07/2007

Off line

Hello Zeurminator

Since every IR led works with FT (some with a bit of tweaking) , SFH487 should work flawlessly.

My only concern is their size since at this time, almost every assembly has been done with 5mm leds.

So we don't have feedback about tracking stability with 3mm leds.

Again, it SHOULD work correctly.

Greetings.
Kestrel #3 11/10/2007 - 14h49

Webmaster (admin)
Class : Webmaster (admin)
Posts : 780
Registered on : 13/07/2007

Off line

The tracking algorithm works better with larger tracking points. Stick to 5mm leds for best results.
gguyaz #4 12/08/2010 - 12h55

Class : Apprenti
Posts : 34
Registered on : 07/08/2010

Off line

SFH487P are better than SFH485P, see radiation characteristics. I use it and it is tracking fine in every lightning situations.
Python231 #5 04/06/2013 - 07h13

Class : Apprenti
Posts : 4
Registered on : 04/06/2013

Off line

Thanks, i will try them as there are no sfh 485P in NZ  :snif:  :snif:  :snif:  :snif:  :snif:  :snif:  :snif:  :snif:  :snif:  :snif:  :snif:
FREETRACK Newbie!!!! B)
Python231 #6 04/06/2013 - 07h21

Class : Apprenti
Posts : 4
Registered on : 04/06/2013

Off line

I'm waiting for RS components to stock some SFH487P (They said that it'll be most probably this friday) and they said they dont stock the SFH485P anymore so nothing I can do.

Is there other people that have experience with the SFH487P? Cause i would love to know, i dont want to stuff it up and have the hassle of going back to their shop which is quite far and exchanging and then waiting EVEN longer and paying extra for a different one.............
FREETRACK Newbie!!!! B)
Steph #7 04/06/2013 - 09h16

Class : Moderator
Posts : 656
Registered on : 16/11/2007

Off line

Hi,

the SFH487P are Ø3mm instead of the Ø5mm SFH485.
You can give them a try, but you need a good setup with your webcam- filter solution.
Otherwise you will probably get problems when tracking the dots.

Try to get the SFH485 from the net. What is your country?
Python231 #8 04/06/2013 - 10h09

Class : Apprenti
Posts : 4
Registered on : 04/06/2013

Off line

I live in New Zealand and im using the VX 1000 with IR Filter removed and floppy  disk on the lense and auto exposure is off and i tested it with the IR remote and im getting 30FPS with minimal jitter

hope someone with that used the SFH857P is good, i only know one person that uses it and its all good from them (the post at the top)
FREETRACK Newbie!!!! B)
Python231 #9 04/06/2013 - 10h28

Class : Apprenti
Posts : 4
Registered on : 04/06/2013

Off line

alright,  I have two  options..........

buy the SFH485 (non-P) which is 5mm, this is not windeangle but i can file it down

or

buy the wideangle SFH487P  which is only 3mm

what is worth??

is having a 5mm LED worth over having a wideangle solution

thank everyone for your EXTREME patience    :pigekedal:





Edited by Python231 on 04/06/2013 at 10h29.
FREETRACK Newbie!!!! B)
Steph #10 05/06/2013 - 10h14

Class : Moderator
Posts : 656
Registered on : 16/11/2007

Off line

New Zealand, nice :)
Well but complicate to recommandate an online electronic shop, sorry.

Get the SFH485 (Ø5mm) and file them down.
You will get better dots.

 >  Fast reply

Message

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).