FreeTrack Forum
FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > microsoft lifecam vx 3000
redscouse | #1 22/09/2007 - 11h04 |
Class : Apprenti Off line |
anybody have experience of using this cam or similar microsoft....can get it up to 24 fps...using 4 point ir led from the finnish guy below.....looking to use it in IL2 and rfactor.......any tips chaps.....anybody removed the ir filter? how do you do that?....I am using the film negative provided by emsi.
cheers ...will update |
jbalat | #2 22/09/2007 - 14h17 |
Class : Apprenti Off line |
set it to outdoors and change exposure =0 to get it up to 30fps
I dont use the film negative nor remove the ir lense on my VX-1000 and I get very good response. Just make sure the are behind you is dark.
Edited by jbalat on 22/09/2007 at 16h04.
|
einsena | #3 22/09/2007 - 19h11 |
Class : Apprenti Off line |
here's some tutorials on how to convert your Webcam to an IR Webcam(by removing the IR filter) http://www.hoagieshouse.com/IR/ check the bottom section of the webpage for your type of webcam, if you're lucky they might have the tutorial to convert yours! *note i haven't tried to mod mine i use regular red LEDs. good luck! |
redscouse | #4 23/09/2007 - 10h30 |
Class : Apprenti Off line |
thanks for your help chaps.....have set exposure slider to 0 however the checkbox for auto is ticked and greyed out...and whatever I try I can't uncheck it....still only 24 fps...
|
tristan68 | #5 23/09/2007 - 11h53 |
Off line |
Hello redscouse
although 24 FPS is a bit slower than the recommanded 30FPS, it should run smoothly. I personnally have an IR modded VX1000 working at 20FPS and it runs smoothly on IL2, which i use for tests. cheers. |
jbalat | #6 24/09/2007 - 06h48 |
Class : Apprenti Off line |
did you set the camera to OUTDOORS ? This turns off the flicker...
|
tankbuster | #7 24/09/2007 - 23h19 |
Class : Habitué Off line |
Exactly the same with my 1000. |
redscouse | #8 25/09/2007 - 00h55 |
Class : Apprenti Off line |
and does freetrack work well for you tankbuster at 24 fps
|
Uther | #9 25/09/2007 - 10h46 |
Class : Apprenti Off line |
I have freetrack running at 20fps on my cam (not vx) and it works at least as good as my TiR2.
|
jbalat | #10 25/09/2007 - 13h46 |
Class : Apprenti Off line |
Please go to my site for pictures on my setup for 30fps
Gamenight Website |
tankbuster | #11 25/09/2007 - 23h39 |
Class : Habitué Off line |
Yes, it works fine in Armed Assault. I'm just curious to know if it would be any better if I was getting 30 FPS from the webcam. |
tankbuster | #12 25/09/2007 - 23h45 |
Class : Habitué Off line |
Followed that chapter and verse. 24 FPS. |
C6_LeBorgne | #13 26/09/2007 - 18h14 |
Class : Beta Tester Off line |
Try another USB port !
|
tankbuster | #14 26/09/2007 - 23h18 |
Class : Habitué Off line |
Hmmm. Different USB port, now it's down to 20 FPS
|
Kestrel | #15 27/09/2007 - 04h40 |
Off line |
Indicating it could be usb related, try removing all other usb devices, check usb bandwidth in Device Manager, make sure you've got usb set up properly in your BIOS and in Windows and try using a usb that isn't sharing its IRQ with another hardware device (use the menu option 'View Resources by Connection' in Device Manager). |
FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > microsoft lifecam vx 3000
> Stats
1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).
Powered by Connectix Boards 0.8.4 © 2005-2024 (8 queries, 0.044 sec)