FreeTrack Forum - Series FreeTrack Resistor Calculator

Welcome, you're not connected. ( Log in - Register )

RSS > Series FreeTrack Resistor Calculator, Calculating Resistors for Series Circuit

staplerd	#1 18/10/2008 - 17h55 Top
Class : Apprenti Posts : 3 Registered on : 18/10/2008 Off line	Hey all... I cam across this website which I found to be helpful to calculate the resistor needed for a Series setup (since I soldered it that way be fore looking at the calculator wizard on the site). http://ourworld.compuserve.com/homepages/Bill_Bowden/led.htm *I am using an unregulated power supply so I added 30% to the voltage (1.5v x 3= 4.5 + 30% = 5.85v) Please correct me if this is not accurate or helpful. Thanks.
tristan68	#2 20/10/2008 - 10h18 Top
Class : Electronicien en chef Posts : 651 Registered on : 10/07/2007 Off line	The Led wizard already does that job , and also selects the most appropriate setup, based on your led specs and the power supply you're using. Led Wizard here cya

> Stats

2 user(s) connected during the last 10 minutes (0 member(s) and 2 guest(s)).