FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > Radio Shack IR LEDs #276-143 Volt-1.28 29ma 940nm

RSS >  Radio Shack IR LEDs #276-143 Volt-1.28 29ma 940nm
domineaux #1 05/04/2008 - 19h02

Class : Apprenti
Posts : 10
Registered on : 29/03/2008

Off line

What do you think of the Radio SHack IR LEDs... 276-143

Forward Voltage = 1.28 v
Current - 29ma
940 nm

---------------------------------------------------------------------------
George #2 06/04/2008 - 17h26

Class : Apprenti
Posts : 2
Registered on : 25/03/2008

Off line

Somewhere I read, that 940 nm is not recognized by every webcam. Better take 880nm diodes.

29mA, maybe a little bit less. Depends on your camera and filters.
domineaux #3 07/04/2008 - 01h25

Class : Apprenti
Posts : 10
Registered on : 29/03/2008

Off line

I went ahead and used them.  They appear to work fine with my MSFT VX-3000 webcam with IR filter removed.

I used them as is, but I think I may sand them down if needed for wider viewing by webcam.
Edited by domineaux on 07/04/2008 at 01h26.

 >  Fast reply

Message

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > Radio Shack IR LEDs #276-143 Volt-1.28 29ma 940nm

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).