FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS > help for a nood, looking for help for a 1 point setup

mrskwid	#1 28/04/2014 - 23h07 Top
Class : Apprenti Posts : 3 Registered on : 28/04/2014 Off line	so the web site say's you can make a 1 point clip with just a LED flashlight if this is true and work's passingly well, and if what kind of flashlight works well i was thinking a book light with a long neck.
Stormrider	#2 30/04/2014 - 17h14 Top
Class : Légende du Forum Posts : 466 Registered on : 02/01/2013 Off line	Hi there, In the handbook you can read that they advise to use a red led.But you can always try if it works with that long neck light. http://forum.free-track.net/index.php?showtopic=413
mrskwid	#3 01/05/2014 - 15h37 Top
Class : Apprenti Posts : 3 Registered on : 28/04/2014 Off line	thank's. i was just wondering if anyone had tried it.
Stormrider	#4 01/05/2014 - 17h47 Top
Class : Légende du Forum Posts : 466 Registered on : 02/01/2013 Off line	a one point clip is the most easiest way to get ir-tracking.It is just a pitty that you only have 2dof(yaw and pitch).With a 3 point model you can do a lot more. 2dof : Two degrees of freedom [Yaw, Pitch] 6dof : Six degrees of freedom [Yaw, Pitch, Roll, X, Y, Z], only available using 3 or 4 point tracking. i was just wondering if anyone had tried it Just try it and let us know if you got it working. If you have any questions just post them on this forum

> Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).