FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS > IR-Clip that can be controlled via USB

Oteg	#1 01/03/2014 - 16h24 Top
Class : Apprenti Posts : 5 Registered on : 28/02/2014 Off line	Hi, would anybody be interested in a clip that can be switched on/off and be dimmed via USB? Cost approximately 2-3€ without the PCB -FT201XQ -PCA9536DP -some Mosfet - 1 Capacitor If, there is interest i might look into that. Edited by Oteg on 01/03/2014 at 17h29.
Steph	#2 01/03/2014 - 19h28 Top
Class : Moderator Posts : 656 Registered on : 16/11/2007 Off line	...sounds good. Do you got a circuit diagram?
Oteg	#3 01/03/2014 - 19h44 Top
Class : Apprenti Posts : 5 Registered on : 28/02/2014 Off line	not yet thats why im asking
Oteg	#4 02/03/2014 - 14h09 Top
Class : Apprenti Posts : 5 Registered on : 28/02/2014 Off line	(R7 should be 470 ohm not 10 k) The whole thing would fit on a 19mmx19mm pcb. To get it running a view lines of code in would have to be written for the uc. Some more lines for the gui on a pc ... If one would order 500 of the pcbs it would cost about 100 €, so about 0.20€ per circuit. I have accesses to a rather powerful pcb-mill so for me it would be free to get a prototype. Edited by Oteg on 02/03/2014 at 21h15.

> Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).