FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS > Monolithic 3D-Printed Clip

Oteg	#1 28/02/2014 - 12h59 Top
Class : Apprenti Posts : 5 Registered on : 28/02/2014 Off line	I created a clip that can be printed in one piece. The cables are running internally. Bill of Materials 1 x 3d Printer and material 2 x thin cables two colors each about 20 cm 3 x Orsam SFH 485 P LEDs 1 x 10 Ohm Resitor 1/8 W Power rating 1 x Usb Cable for Power supply 2 x cable ties 2.5mm Here a link to thingiverse Work is in still Progress ... Updates: ----------------------------- v2 - increased drill diameter so LEDs fit better - increased hole size so the cable ties fit more easily - changed size so it is the standard size for free track (old size was 26 / 40 / 70 /76) ----------------------------- Fly save! Edited by Oteg on 01/03/2014 at 15h52.
Stormrider	#2 28/02/2014 - 19h18 Top
Class : Légende du Forum Posts : 466 Registered on : 02/01/2013 Off line	it looks very nice.

> Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).