|
Class : Apprenti
Posts : 21
Registered on : 10/09/2010
Off line
|
Hello.
I have these parts....
3 x (radio shack 276-0143) infrared leds
5 count 10 ohm 1/2 watt 5% tol resistors (radio shack 271-1101)
1 battery pack-(radio shack 270-0409) using 4 aa batteries 6 volt total
1 logiteck webcam 200
some film
some wire , any wire will do right?
Took the IR filter out of the webcam
Im a bit foggy on how to assemble the parts and how to read the wizzard results.
Do I go.....battery pack + line to one single resistor then led,led,led to neg line back to battery to complete circuit?
|
|
Class : Apprenti
Posts : 21
Registered on : 10/09/2010
Off line
|
Ok got it wired up and working.
Tested the lights with a nightvision camcorder, all 3 shine!
Now, when I goto free track, I get three blobs, and it looks like it is zoomed in.
EDIT........I see focus on the camera kinda fixed this...
Edited by Jaeger55 on 25/02/2014 at 01h43. |
