FreeTrack Forum - Eliminating shakes/jitters/jumpiness

Home

Welcome, you're not connected. ( Log in - Register )

FreeTrack Forum > FreeTrack : English Forum > Support : FreeTrack Software > Eliminating shakes/jitters/jumpiness

RSS > Eliminating shakes/jitters/jumpiness, A bit lost...

nealius	#1 20/03/2013 - 00h41 Top
Class : Apprenti Posts : 8 Registered on : 20/03/2013 Off line	I've got FreeTrack working wonderfully (or almost wonderfully) with a TrackClip Pro, but I am running into issues when I look left/right. Despite the fact that my head is not moving, FreeTrack seems to think I am moving and the view is a bit shaky. It's exacerbated when I look down and to the right/left, to the point where I am chasing cockpit switches all over the monitor and it really slows me down. I have tried deadzones/smoothing on the curves but it hasn't done anything. I am really lost on anything outside the curves and I would like some pointers to get me in the right direction to smooth this jerkiness out so I'm not fumbling for switches in the cockpit.
Steph	#2 20/03/2013 - 08h40 Top
Class : Moderator Posts : 656 Registered on : 16/11/2007 Off line	Hi nealius did you set up the "model dimensions" and "model position" ? See: http://forum.free-track.net/index.php?showtopic=3543&message=18133
nealius	#3 20/03/2013 - 22h54 Top
Class : Apprenti Posts : 8 Registered on : 20/03/2013 Off line	Yes, model position and model dimensions are set accurately. Everything works well except for this shakiness when I'm looking down at side panels and trying to flip switches or turn knobs. I would think that setting deadzones would eliminate the shakes but for whatever reason it doesn't work.
Steph	#4 20/03/2013 - 23h07 Top
Class : Moderator Posts : 656 Registered on : 16/11/2007 Off line	Hi, set low sensitivity and half smoothing values like this: http://forum.free-track.net/index.php?showtopic=3543&message=18150 Can you copie your Profile-file *.FTP (you will find it in your Freetrack\Profiles directory) and paste it in here?
nealius	#5 21/03/2013 - 03h32 Top
Class : Apprenti Posts : 8 Registered on : 20/03/2013 Off line	Here's my current profile. Sensitivity is already pretty low (1.0-1.3). I'll try smoothing. [Advanced] Average=20 IgnoreBackwardZ=1 MaintainPausedData=0 RollRelativeRot=0 RelativeTransYaw=0 RelativeTransPitch=0 RelativeTransRoll=0 RelativeTransX=0 RelativeTransY=0 RelativeTransZ=0 [Sensitivity] Yaw=12900 Pitch=12900 Roll=13200 X=9600 Y=10200 Z=300 [Smoothing] Yaw=15 Pitch=15 Roll=15 X=15 Y=15 Z=15 Zooming=1 SmoothStableMultiplier=25 SmoothRawMultiplier=25 Dynamic=20 [Inverted] Yaw=0 Pitch=0 Roll=0 X=0 Y=0 Z=0 [AxisEnabled] Yaw=1 Pitch=1 Roll=1 X=1 Y=1 Z=1 [AxisMap] Yaw=0 Pitch=1 Roll=2 X=3 Y=4 Z=5 [YawCfg] X0=0 Y0=102 X1=2 Y1=92 X2=2 Y2=85 X3=321 Y3=1 [PitchCfg] X0=0 Y0=102 X1=2 Y1=92 X2=2 Y2=85 X3=319 Y3=2 [RollCfg] X0=0 Y0=102 X1=2 Y1=69 X2=2 Y2=77 X3=121 Y3=2 [XCfg] X0=0 Y0=102 X1=2 Y1=31 X2=2 Y2=61 X3=165 Y3=2 [YCfg] X0=0 Y0=102 X1=2 Y1=29 X2=2 Y2=61 X3=121 Y3=2 [ZCfg] X0=0 Y0=102 X1=2 Y1=56 X2=200 Y2=43 X3=241 Y3=2 [Output] MouseX=0 MouseXEnabled=1 MouseY=1 MouseYEnabled=1 MouseWheel=0 MouseWheelEnabled=0 MouseAutoPan=0 MouseAbsolute=0 MouseWheelScale=50 PPJoyControllerNumber=1 FreeTrack=1 TIR=1 Mouse=0 PPJoy=0 Keys=0 SimConnect=0 FS=0 [Mapping] Pause=Shift + F9 PauseBeep=0 PauseToggle=1 Center=Shift + F11 CenterBeep=0 CenterToggle=0 CustomCenterSet= CustomCenterSetBeep=1 CustomCenterSetToggle=1 CustomCenterReset= CustomCenterResetBeep=1 CustomCenterResetToggle=1 SmoothStable= SmoothStableBeep=1 SmoothStableToggle=1 SmoothRaw= SmoothRawBeep=1 SmoothRawToggle=1 Yaw= YawBeep=1 YawToggle=1 Pitch= PitchBeep=1 PitchToggle=1 Roll= RollBeep=1 RollToggle=1 X= XBeep=1 XToggle=1 Y= YBeep=1 YToggle=1 Z= ZBeep=1 ZToggle=1 FreeTrack= FreeTrackBeep=1 FreeTrackToggle=1 TIR= TIRBeep=1 TIRToggle=1 Mouse= MouseBeep=1 MouseToggle=1 Joystick= JoystickBeep=1 JoystickToggle=1 Keymap= KeymapBeep=1 KeymapToggle=1 SimConnect= SimConnectBeep=1 SimConnectToggle=1 ProfileA= ProfileABeep=1 ProfileAToggle=1 ProfileB= ProfileBBeep=1 ProfileBToggle=1 ProfileC= ProfileCBeep=1 ProfileCToggle=1 [OutputKeys] YawThreshold=50 YawHold=1 YawPos= YawNeg= PitchThreshold=50 PitchHold=1 PitchPos= PitchNeg= RollThreshold=50 RollHold=1 RollPos= RollNeg= XThreshold=50 XHold=1 XPos= XNeg= YThreshold=50 YHold=1 YPos= YNeg= ZThreshold=50 ZHold=1 ZPos= ZNeg= [CustomCenter] Yaw=0 Pitch=0 Roll=0 X=0 Y=0 Z=0
Steph	#6 21/03/2013 - 20h30 Top
Class : Moderator Posts : 656 Registered on : 16/11/2007 Off line	Hi, try this one out: What are your model dimensions and model positions? Spoiler[Advanced] Average=50 IgnoreBackwardZ=1 MaintainPausedData=0 RollRelativeRot=0 RelativeTransYaw=1 RelativeTransPitch=1 RelativeTransRoll=1 RelativeTransX=1 RelativeTransY=1 RelativeTransZ=1 [Sensitivity] Yaw=12000 Pitch=12000 Roll=14000 X=10000 Y=10000 Z=2000 [Smoothing] Yaw=80 Pitch=80 Roll=50 X=50 Y=50 Z=50 Zooming=120 SmoothStableMultiplier=25 SmoothRawMultiplier=25 Dynamic=15 [Inverted] Yaw=0 Pitch=0 Roll=0 X=0 Y=0 Z=0 [AxisEnabled] Yaw=1 Pitch=1 Roll=1 X=1 Y=1 Z=1 [AxisMap] Yaw=0 Pitch=1 Roll=2 X=3 Y=4 Z=5 [YawCfg] X0=0 Y0=102 X1=9 Y1=37 X2=328 Y2=44 X3=359 Y3=2 [PitchCfg] X0=0 Y0=102 X1=9 Y1=37 X2=328 Y2=44 X3=359 Y3=2 [RollCfg] X0=0 Y0=102 X1=9 Y1=37 X2=328 Y2=44 X3=359 Y3=2 [XCfg] X0=0 Y0=102 X1=5 Y1=36 X2=261 Y2=35 X3=320 Y3=2 [YCfg] X0=0 Y0=102 X1=5 Y1=36 X2=261 Y2=35 X3=320 Y3=2 [ZCfg] X0=0 Y0=102 X1=5 Y1=36 X2=261 Y2=35 X3=320 Y3=2 [Output] MouseX=0 MouseXEnabled=1 MouseY=1 MouseYEnabled=1 MouseWheel=0 MouseWheelEnabled=0 MouseAutoPan=0 MouseAbsolute=0 MouseWheelScale=50 PPJoyControllerNumber=1 FreeTrack=1 TIR=1 Mouse=0 PPJoy=0 Keys=0 SimConnect=0 FS=0 [Mapping] Pause=Shift + F9 PauseBeep=0 PauseToggle=1 Center=Shift + F11 CenterBeep=0 CenterToggle=0 CustomCenterSet= CustomCenterSetBeep=1 CustomCenterSetToggle=1 CustomCenterReset= CustomCenterResetBeep=1 CustomCenterResetToggle=1 SmoothStable= SmoothStableBeep=1 SmoothStableToggle=1 SmoothRaw= SmoothRawBeep=1 SmoothRawToggle=1 Yaw= YawBeep=1 YawToggle=1 Pitch= PitchBeep=1 PitchToggle=1 Roll= RollBeep=1 RollToggle=1 X= XBeep=1 XToggle=1 Y= YBeep=1 YToggle=1 Z= ZBeep=1 ZToggle=1 FreeTrack= FreeTrackBeep=1 FreeTrackToggle=1 TIR= TIRBeep=1 TIRToggle=1 Mouse= MouseBeep=1 MouseToggle=1 Joystick= JoystickBeep=1 JoystickToggle=1 Keymap= KeymapBeep=1 KeymapToggle=1 SimConnect= SimConnectBeep=1 SimConnectToggle=1 ProfileA= ProfileABeep=1 ProfileAToggle=1 ProfileB= ProfileBBeep=1 ProfileBToggle=1 ProfileC= ProfileCBeep=1 ProfileCToggle=1 [OutputKeys] YawThreshold=50 YawHold=1 YawPos= YawNeg= PitchThreshold=50 PitchHold=1 PitchPos= PitchNeg= RollThreshold=50 RollHold=1 RollPos= RollNeg= XThreshold=50 XHold=1 XPos= XNeg= YThreshold=50 YHold=1 YPos= YNeg= ZThreshold=50 ZHold=1 ZPos= ZNeg= [CustomCenter] Yaw=0 Pitch=0 Roll=0 X=0 Y=0 Z=0
nealius	#7 21/03/2013 - 21h57 Top
Class : Apprenti Posts : 8 Registered on : 20/03/2013 Off line	I think I fixed it. I increased the smoothing on all axes to 200 and added a medium deadzone to some of the curves. It completely eliminated the shakiness, but there is a very slight delay in movement. I'm not sure if I can get rid of that or if I just have to get used to it. I'll try that other profile and post my model dimensions when I get home.

FreeTrack Forum > FreeTrack : English Forum > Support : FreeTrack Software > Eliminating shakes/jitters/jumpiness

> Stats

2 user(s) connected during the last 10 minutes (0 member(s) and 2 guest(s)).