|
Class : Apprenti
Posts : 1
Registered on : 16/12/2011
Off line
|
Hi everybody,
I cannot find any information on how to prepare a M$ LifeCam VX-7000 (NOT VX-700!!!!!) for FreeTrack. Anyone here who got this stuff working and is willing to give any assistance? Any help greatly appreciated!!
Thx Jumbolino
|
|
Class : Apprenti
Posts : 12
Registered on : 13/10/2011
Off line Www
|
Hello.
I have VX-3000 and i have remove the IR filter because my model is
based on IR leds. I use a part of an old diskette in front of the camera
so everything is black. From the driver, i have set all color/brightness
sliders to 0 except gamma correction. Because i have window in my
back only with the gamma correction during the day or during night i
got results.
Before start do anything, make sure you have found the proper position
for the camera and the focus is ok (not blur).
With Freetrack you will find results in a mixed conjuction of SENSIVITIES
and CURVES! Patience, and keep backup of your profiles.
If you see the ghosted ticked button in autoexposure find the standalone
"enablebutton.exe" to enable it.
Edited by ADHS on 18/12/2011 at 02h12.
What if i am Hellenas, while the Earth wars prevents me to give the ability to the whole humanity to reach the Galaxies ?
|