FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS > No "Red" on image, What has happened?

VOZzer	#1 14/02/2011 - 08h57 Top
Class : Apprenti Posts : 9 Registered on : 11/07/2010 Off line	Hi everyone, I've been using FreeTrack flawlessly for the past few years, and even the 2.2 update has been great for me. However today, I noticed a problem on my camera. When I start the freetrack interface "bursts" of strong white or infared light appear WHITE, not RED. This is weird, because my modified VX1000 camera has worked perfectly in the past. See this picture: AS you can see, light is being seen as white/darkish colours compared to the red with crosses through it. Any ideas? Regards, VOZzer (Jack)
VOZzer	#2 15/02/2011 - 17h54 Top
Class : Apprenti Posts : 9 Registered on : 11/07/2010 Off line	Any ideas?
Morpheus	#3 16/02/2011 - 12h11 Top
Class : Apprenti Posts : 43 Registered on : 27/09/2009 Off line	Did you try with another webcam ? Edited by Morpheus on 16/02/2011 at 12h11.
jym	#4 17/02/2011 - 11h07 Top
Class : Apprenti Posts : 5 Registered on : 16/02/2011 Off line	Hi. You can change video setting in the stream options of your cam. For me, it was "I420" in place of "RGB 24" for my Hercules Classic Link webcam Good luck
VOZzer	#5 17/02/2011 - 22h31 Top
Class : Apprenti Posts : 9 Registered on : 11/07/2010 Off line	Thanks for your help guys. I am using VX1000 - I changed it from RG24 to I420 and it works a treat now!!!

> Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).