FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > enablebuttton location

RSS >  enablebuttton location
dagmba #1 21/12/2009 - 19h02

Class : Apprenti
Posts : 2
Registered on : 04/12/2009

Off line

Hello,

Can anyone tell me where to acquire the enable button software?

I have built a working three IR LED clip and use a VX-1000 with the IR filter removed.  I need to adjust the auto exposure.  I suppose it is for that reason that free-track is not recognizing the clip.

Thanks

David
gonzo #2 23/12/2009 - 17h51

Class : Apprenti
Posts : 19
Registered on : 17/08/2008

Off line

hi,


have a look here

http://www.free-track.net/english/hardware/webcam.php

the dl should be under vx1000 or vx3000 even if you use another camera. the button enabler is a general prog and not camera specific.

if the link shouldnt work switch the language of the site to french and search for the link again i had some problems with broken links and the french version is always just fine

 >  Fast reply

Message

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > enablebuttton location

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).