|
Class : Apprenti
Posts : 18
Registered on : 18/12/2009
Off line
|
how do you test the LED's. I may have burnt mine out. Don't know if it's the resistor or the LED's. Used my electrical tester and got a beep, so I'm guessing they are okay. I"m using a 47K ohm, 1/4 watt, 5% resister with a 6 volt DC power adapter. Anyone got an answer for me
Also if the resister calculator says you need a 43 ohm resister and all I have on had is a 47 ohm one, can I get by with that and still use 6 volts DC?
TheFabFour
|
|
Class : Beta Tester
Posts : 224
Registered on : 09/08/2007
Off line
|
il n' y a aucun problème à utiliser une résistance plus élevée , la tension sera juste un peu inférieur à celle désiré mais ne devrait pas gêner le fonctionnement
----------------------------
There is no problem to use a higher resistance, the voltage is just slightly lower than desired but should not interfere with the operation .
C2D 6420 , 2Go DDR II , 570 GTX , Wiimote , A-quip mini BT Dongle , Thrustmaster Warthog , Pro Gamer Command Unit et PCDASH2
|