FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS > Construction LED not working, Help please

gaedious	#1 30/12/2008 - 06h05 Top
Class : Apprenti Posts : 13 Registered on : 07/12/2008 Off line	Ok, I have my 3-point clip soldered together and is according to the LED assembly wizard specification that says I need a serial assembly. I made sure my LEDs are on the correct position. The one with a flag is a negative sign and the other short one is positive. I'm not sure what has gone wrong I hope someone out there could help me to pinpoint which part is at fault. I'm not sure if my soldering time on a component was long enough to destroy the LEDs but hopefully not. Below is the picture of my 3-point clip Click here Sigh Any help would be much appreciated. Thanks Edited by gaedious on 30/12/2008 at 06h35.
tristan68	#2 30/12/2008 - 16h04 Top
Class : Electronicien en chef Posts : 651 Registered on : 10/07/2007 Off line	Hello gaedious According to your picture, i think you wired the leds the wrong way. Simply try to exchange red and black wire , on the battery adapter. cya
gaedious	#3 31/12/2008 - 03h53 Top
Class : Apprenti Posts : 13 Registered on : 07/12/2008 Off line	Thanks tristan, it worked but not sure whether it works as it should. Are they supposed to emit one red dot only?

> Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).