FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS >  IR LED help
WhiteWolf #1 21/04/2008 - 03h35

Class : Apprenti
Posts : 6
Registered on : 21/04/2008

Off line

Im constructing a point model and im wondering if these ir LED's would be ok?

http://www.dse.com.au/cgi-bin/dse.storefront/480bf4fb07f41d522740c0a87f9c06ea/Product/View/Z3235
Edited by WhiteWolf on 21/04/2008 at 05h31.
lilpunk1302 #2 21/04/2008 - 05h08

Class : Habitué
Posts : 50
Registered on : 07/11/2007

Off line

There's nothing there :/
WhiteWolf #3 21/04/2008 - 05h32

Class : Apprenti
Posts : 6
Registered on : 21/04/2008

Off line

hmm lol. For some reason the link didnt show up in the post, should b ok now though
lilpunk1302 #4 21/04/2008 - 07h19

Class : Habitué
Posts : 50
Registered on : 07/11/2007

Off line

I'm not the foremost expert on this, but I'm pretty sure that a 20 degree viewing angle is really bad.

So when looking straight ahead, you'll be fine, but as soon as you turn your head more than 10 degrees in any direction, the LED's arn;t gonna be visible.

I'm also not sure about the Smokey Blue paint on top, the way I see it, it would just cover the light.

So IMO, No, those wouldn't be the best choice, where do you live, some other users can get you links to some good ones.
WhiteWolf #5 21/04/2008 - 07h30

Class : Apprenti
Posts : 6
Registered on : 21/04/2008

Off line

I live in Adelaide, Australia
Weyrman #6 21/04/2008 - 11h31

Class : Apprenti
Posts : 14
Registered on : 26/01/2008

Off line

WhiteWolf, check your private messages
submdi #7 22/04/2008 - 02h31

Class : Apprenti
Posts : 8
Registered on : 18/04/2008

Off line

I also live in Adelaide :D

It just so happens I have just made my 3 point setup, and I used these exact same LEDs. I'm not sure if I'd have a lot better performance with different ones, but these work fine for me.

Just get them and see how you go.

 >  Fast reply

Message

 >  Stats

2 user(s) connected during the last 10 minutes (0 member(s) and 2 guest(s)).