FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS >  My Setup, and one problem., Leds position.
tomer_inbar #1 28/04/2008 - 13h28

Class : Apprenti
Posts : 14
Registered on : 12/04/2008

Off line

Posted Image
Posted Image
Posted Image
Posted Image
Posted Image

Posted Image

Now, The FreeTrack softwere rank my setup because I guess it's not accurate.
I've deflection of 1(+-) cm.

It significant?

*The measured is not accurated. It was deflected when the epoxy goes dry.

Thank's :)
Edited by tomer_inbar on 28/04/2008 at 13h31.
tomer_inbar #2 29/04/2008 - 09h55

Class : Apprenti
Posts : 14
Registered on : 12/04/2008

Off line

Anyone?
superking200 #3 29/04/2008 - 12h09

Class : Apprenti
Posts : 30
Registered on : 07/02/2008

Off line

hi
try to measure the final model  and change the measures within freetrack!
tomer_inbar #4 29/04/2008 - 13h55

Class : Apprenti
Posts : 14
Registered on : 12/04/2008

Off line

This is what I did.
Now it's better but not perfect.

One guy in this forum recommended to change the position of the top led, and of cource to bring this value to the software.

I will try to lift it up and lower it down, and I will follow the movment in the software.

Thank's for now, news soon.

 >  Fast reply

Message

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).