FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS > InfraRed (IR) blocking filter

tomer_inbar	#1 12/04/2008 - 22h18 Top
Class : Apprenti Posts : 14 Registered on : 12/04/2008 Off line	I've the camera 320SPACEC@M: The camera had opened and the lens look like this: The square at the top part of the component is the IR len? Thank's.
Niek	#2 12/04/2008 - 22h28 Top
Class : Apprenti Posts : 11 Registered on : 24/03/2008 Off line	If it has a slight purple colour, it must be. But did you test first if you can use the camera without removing the filter? My Logitech camera works fine without removing it, a piece of floppydisk taped before the lens is enough to filter out all other light and my IR leds are picked up fine.
tomer_inbar	#3 13/04/2008 - 12h16 Top
Class : Apprenti Posts : 14 Registered on : 12/04/2008 Off line	Ok, for begining I will try to use without removing the len. Will be news in a week ---------------------------------------------------------------------------------------------- Another quastion: What is the different between the 3 and the 4 leds configuration? assumption: Maybe the 4 leds configuration gives more direction of movments? I saw in FS2004 that the AXIS: Yaw, Pitch, Roll and Z could use. What about The X and Y axis? Thank's for your comments. Edited by tomer_inbar on 13/04/2008 at 19h21.
tankbuster	#4 13/04/2008 - 23h34 Top
Class : Habitué Posts : 66 Registered on : 28/08/2007 Off line	4 emitter is an obsolete design. The 3 point configurations work as well, if not better than the 4 point.

> Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).