FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

sailor #1 21/08/2013 - 18h35

Class : Apprenti
Posts : 6
Registered on : 23/07/2013

Off line

Hi guys i have been using freetrack with most good results. (some tweeking on different sims) BUT on a-10c warthog i cant get it too track at all inside the cockpit, external views i.e F2 i can look all round the plane with no problem.

I have tried a few thing infact a load of thing's too try and get it too track but at no success  :(

I have looked around on forums but all i seem too get is about the beta testing

As anyone got this up and running??

Cheers sailor
Blindasabat #2 23/08/2013 - 11h24

Class : Habitué
Posts : 83
Registered on : 02/05/2011

Off line

Is it just A-10 or don't you have headtracking with all DCS World products?
In any case, check out this previous thread:
JayPeeII #3 24/09/2013 - 07h03

Class : Apprenti
Posts : 26
Registered on : 31/08/2013

Off line

Place the headtracker.dll as follows

DCS World\bin\headtracker.dll

as well as (yes, indeed, the same file on two locations)

DCS World\bin\headtracker\headtracker.dll

The first one makes Free Track show up in the ingame configuration, the 2nd makes it work in the pit. Factory resets/updates of DCSW tend to erase both entries so double check that.

Don't use trackIRfixers, workarounds, PPjoy and whatnot. Just use the Eagle Dynamics headtracker.dll. Every other method is either clumsy or pre-1.2.5, especially those that tell you to change lines and change settings per aircraft.

Headtracker.dll for x64 installations of DCS World, works on 1.2.5 and 1.2.6:
Edited by JayPeeII on 24/09/2013 at 07h18.

 >  Fast reply


 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).