FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > Is possible to make 4 Points CAP, without any LED in cap?

Pages (3): [1] - 2 - 3

RSS > Is possible to make 4 Points CAP, without any LED in cap?, Using Vector Clip from trackir

NapalmCandy	#1 22/10/2007 - 22h45 Top
Class : Apprenti Posts : 4 Registered on : 22/10/2007 Off line	This is the original "3 points" from TrackIR, has no LEDS, it has reflectors. So if i put a battery of IR Leds in the top of monitor, near webcam looking cap and the 4 points reflectors... will it work? Or is necessary to put LEDS on a cap? The price of this "Vector Clip" is 9,95$ in naturalpoint.com Anyone has tried it?
luca	#2 23/10/2007 - 01h45 Top
Class : Habitué Posts : 54 Registered on : 03/09/2007 Off line	Is not necessary to use leds, if u paint yourself and your room in black, you can use only 3-4 piece of white paper...or if u have an infrared illuminator, and 3-4 retro reflective pieces the camera will see only the retro reflective pieces....but Where to buy ir illuminator? or is better a webcam ir with 6 infrared leds like ODYS ? When someone that own this kind of webcam or illuminator, will give a try, we will know for sure. Stay FREE
Kestrel	#3 23/10/2007 - 04h13 Top
Class : Webmaster (admin) Posts : 780 Registered on : 13/07/2007 Off line	Just remove the IR filter from the webcam, build/buy an IR light source to shine on reflectors and buy some retroreflective material. The reflectors must be circular. Support FreeTrack
einsena	#4 23/10/2007 - 04h20 Top
Class : Apprenti Posts : 45 Registered on : 27/08/2007 Off line	luca @ 23/10/2007 - 01h45 a dit: Is not necessary to use leds, if u paint yourself and your room in black, you can use only 3-4 piece of white paper... lol it would theoretically work maybe i should try it lol!
NapalmCandy	#5 23/10/2007 - 19h18 Top
Class : Apprenti Posts : 4 Registered on : 22/10/2007 Off line	Here a IR iluminator, it is Nintendo WII's "Sensor bar". You can to buy it in ebay for about 9€. I will to remove the IR filter of my webcam now
NapalmCandy	#6 23/10/2007 - 20h15 Top
Class : Apprenti Posts : 4 Registered on : 22/10/2007 Off line	I has break my webcam when i tried to remove the IR cristal filter
luca	#7 23/10/2007 - 22h18 Top
Class : Habitué Posts : 54 Registered on : 03/09/2007 Off line	OK As Suggested by Kestrel.... ....try to build an IR light source to shine on reflectors and a circular piece of reflective material. So we need also ...a battery pack (2x1,5v) What kind of leds to buy and where? How many leds an illuminator needs? maybe 4 as in the trackir? or we need 6-8 leds? At the end of the work the goal is to obtain a screen like this in Freetrack. Stay FREE
Paperinik	#8 24/10/2007 - 01h30 Top
Class : Apprenti Posts : 10 Registered on : 02/10/2007 Off line	I already built something like a edimensional vector following dimension suggested by freetrack, and it work perfectly. I have a webcam with 2 infrared led pointed in front of me and I used a reflecting stripe removed from an emergency jacket. System work better without ir filter but if you have so light in the room will be a problem.
Kestrel	#9 24/10/2007 - 03h20 Top
Class : Webmaster (admin) Posts : 780 Registered on : 13/07/2007 Off line	NapalmCandy @ 23/10/2007 - 20h15 a dit: I has break my webcam when i tried to remove the IR cristal filter Did you follow an online guide? How did you break it? Support FreeTrack
luca	#10 24/10/2007 - 05h39 Top
Class : Habitué Posts : 54 Registered on : 03/09/2007 Off line	Paperinik @ 24/10/2007 - 01h30 a dit: I already built something like a edimensional vector following dimension suggested by freetrack, and it work perfectly. I have a webcam with 2 infrared led pointed in front of me and I used a reflecting stripe removed from an emergency jacket. System work better without ir filter but if you have so light in the room will be a problem. Have u covered the webcam lens with a negative photo-film? Stay FREE
Paperinik	#11 24/10/2007 - 14h23 Top
Class : Apprenti Posts : 10 Registered on : 02/10/2007 Off line	No, I tried using a plastic glass ir filter removed from an old VCR. I was installed in front of remote ir sensor. Do you think a negative photo-film work better?
Laci	#12 24/10/2007 - 19h30 Top
Class : Apprenti Posts : 22 Registered on : 30/07/2007 Off line	Paperinik @ 24/10/2007 - 14h23 a dit: No, I tried using a plastic glass ir filter removed from an old VCR. I was installed in front of remote ir sensor. Do you think a negative photo-film work better? It does different things. The IR filter blocks IR light. We need the pfoto film to ONLY allow IR light to the sensor.
Paperinik	#13 25/10/2007 - 00h38 Top
Class : Apprenti Posts : 10 Registered on : 02/10/2007 Off line	The IR filter blocks IR light Mmmhhh It was installed in front of reciver ir sensor, if it blocks IR light, how can work the remote control? Also, looking the filter it appear very dark and just some red color can pass trough it. Here my custom vector:
luca	#14 25/10/2007 - 01h53 Top
Class : Habitué Posts : 54 Registered on : 03/09/2007 Off line	I've never tried to use the plastic from a vcr, but with the photo film you can add several layers of film until the webcam see only the reflective parts, and surely doesn't block ir rays in input and return. I'm making a test with an 8 IR leds illuminator..I'll let u know Stay FREE
luca	#15 25/10/2007 - 02h26 Top
Class : Habitué Posts : 54 Registered on : 03/09/2007 Off line	Experiment just finished! it works fine for me. I've used an ir illuminator with 8 leds, it's a camera for home video surveillance system like this A little reflective piece stolen from an emergency jacket And my webcam Philips Toucam Pro without ir filter This is the result Light condition of the room in the image is a normal strong desk lamp turned against the wall for a diffused light, with the room's chandelier on, the result does not chenge! Obviously if I turn the desklamp on my face my webcam loose the point and all my clear face parts are visible in the screen, but this is no more a test but a suicide...as far as I know, trackir could not be used correctly with too much light in the room. I'm satisfied, but now I must build an ir illuminator Edited by luca on 25/10/2007 at 02h43. Stay FREE