FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS >  1946 ultra pack 1.6
shadowrun #1 20/03/2009 - 20h07

Class : Apprenti
Posts : 5
Registered on : 20/03/2009

Off line

Hi folks,
i´m a freetrack beginner (but i know how to google...) and i would kindly need some help. i have bought a good working 3 point tracking cap so 6 degrees of freedom SHOULD be working (only 2 do)
so i have 2 major problems:
1: only the x and y axis are working with the newest freetrack (in black shark and armed assault) but the z axis is not (on the "cam" (cam - profile - output etc...) mode, z values are suspiciously given in the lower left but there is no "depth" movment (in the z axis) in the "skull" and in the games. (again, 2 degrees work)
2: my biggest reason to buy the webcam and install freetrack was to play il21946 (with il2 ultra pack 1.6), but it simply doesnt work... in the txt entry trackir=1 (or something) is on so i dont know what else reason there could be.
i hope you can spare some time to help me bringing my childhood dreams to "reality" (as far as possible :)
Best regards!
shadowrun
vagos #2 22/03/2009 - 09h45

Class : Apprenti
Posts : 22
Registered on : 12/02/2009

Off line

1) Are your 3 points visible from the free track?
2) Measure the distance from all the points and register them in the model tab. That is especially important!
shadowrun #3 22/03/2009 - 11h35

Class : Apprenti
Posts : 5
Registered on : 20/03/2009

Off line

Hi vagos,
yes, the 3 points are clearly visible and are recogniced without problems.( all 3 have a following cross, skull is moving left right, up and down and rolls but is not moving forward or backwards. i also registered them in the model tab. so that should not be the problem...
thx
Jewcookie #4 23/03/2009 - 20h47

Class : Apprenti
Posts : 14
Registered on : 18/03/2009

Off line

And if you make a new profile?

This is what i use for IL2. I installed the 6dof Mod but i find it pretty anoying in IL2. Only the roll is usefull imo.

Posted Image
shadowrun #5 26/03/2009 - 13h47

Class : Apprenti
Posts : 5
Registered on : 20/03/2009

Off line

thx a lot for the info, everything works out now  :D  :D  :D

 >  Fast reply

Message

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).