|
Class : Apprenti
Posts : 3
Registered on : 10/05/2009
Off line
|
i tried a lot of ir leds already but always the same and shaky virtual head. I used adjustments and smooth staff but it makes only less shaky head and slower reaction head.
Are the shaky pointers inside the dots normal? Can the SFH485P solve this problem or is it better for less haking? Thank you...
This is my problem :
http://www.youtube.com/watch?v=16Rf3xK_AvI
Edited by alip on 13/05/2009 at 17h53. |
|
Class : Apprenti
Posts : 25
Registered on : 17/03/2009
Off line
|
I think it's normal, but I'm not sure if I understand the problem you are describing.
Is it shaky when you play a game? Or just when you're looking at the FreeTrack settings?
If you click on "Profile" at the top of FreeTrack, and then go to the "Advanced" tab, there are a few more options which might help you reduce how shaky it is. They are "zoom smoothing multiplier," "dynamic smoothing reduction" and "average". Play with those settings too and see if they help. I use an average of 3%, but your setup will be different for what works best for you.
Good luck!
|
|
Class : Apprenti
Posts : 3
Registered on : 10/05/2009
Off line
|
I already did these but still the same shaky and unfortunately slow head reaction(with high average setting). I think my leds are the problem, because the software can not decide the exact middle point of my leds for the tracking, then when my head doesn't move, pointers begins shaking so my virtual head.
Thanks for your answer, forgive my noob english, appreciated...
|