FreeTrack Forum - Problem with Freetrack

Home

Welcome, you're not connected. ( Log in - Register )

FreeTrack Forum > FreeTrack : English Forum > General Discussion > Problem with Freetrack

RSS > Problem with Freetrack

germantracer	#1 07/01/2009 - 16h40 Top
Class : Apprenti Posts : 6 Registered on : 07/01/2009 Off line	Hello everybody, i built my own 3Point cap today, using a modified Microsoft VX1000 withour IR-Filter and with an negative Film instead of the IR-filter. For the 3Point Cap i used the distances from the hardwarefaq. All Ir-LEDs are correctly shown in Freetrack, but the Skull isnt moving correctly. It is standing upside down and some other wrong directions. I tried to use the constellation with Future Pinball and GT Legends, but it isnt working correctly. If i set Freetrack to Onepoint Model using a Remotecontrol, the skull is moving correctly to the left right, up and down. Additional i have the problem that Freetrack 2.2 Is even producing an error when i start it, after accepting the error the Programm is running but no camera is shown. Freetrack 2.1 is running without this error. What is my failure? I hope u can help me. Sry my bad english, my german is mutch better regards from germany germantracer Edited by germantracer on 07/01/2009 at 16h46.
germantracer	#2 07/01/2009 - 17h48 Top
Class : Apprenti Posts : 6 Registered on : 07/01/2009 Off line	Now, the 3point cap is working great. Just switched through the config and so... its working. The error from 2.2 is still present. Another question, is it better to have a bigger distance between the IR-LEDs or ar the distances from the hardwarefaq the best?
didja	#3 07/01/2009 - 19h23 Top
Class : Webmaster (admin) Posts : 1043 Registered on : 09/07/2007 Off line Www	There are not much different, the distance shouldn't be smaller than the ones in the FAQ though. What error do you get with 2.2 ? Rémy
germantracer	#4 08/01/2009 - 02h41 Top
Class : Apprenti Posts : 6 Registered on : 07/01/2009 Off line	Hi didja, thx for your response. On the 2.2 I have got the following error message when i tried to start the program. Then, after a time while i a was using 2.1, 2.1 gave the same error when i tried to start it. Both Programms were running after this error, but they found no cam. The Page which normaly shows the cam stays empty. As i tried to shut the program down, both... 2.1 and 2.2, they gave me the following error. After hat, i deinstalled both Versions. They were installed in different Folders. now i am running V2.1 without any problems so far. But i dont know if i should retry v2.2.....
didja	#5 08/01/2009 - 15h37 Top
Class : Webmaster (admin) Posts : 1043 Registered on : 09/07/2007 Off line Www	Maybe you shouldn't... 2.2 is quite sensitive with Windows little problems so it's a common erro that hasn't been solved yet. Sorry... Rémy
eisenfpferd	#6 08/01/2009 - 19h22 Top
Class : Apprenti Posts : 15 Registered on : 25/01/2008 Off line	Hallo Germantracer, versuchs ruhig nochmal. Ich habe auch ein paar mal die Installation probiert. Ich hab glaube ich zuletzt erst alles deinstalliert dann FT2.2 und erst als das lief nochmal im anderen Verzeichnis 2.1 installiert. Ich habe auch die VX1000. Hast du die neuste DirectX Version (Link auf FT-Webpage) installiert? War bei mir nötig. Nur das reinkopieren irgendeiner DLL hat nicht geklappt. Viel Glück for english spoken: first uninstall, then Install FT 2.2 then in other Folder 2.1 Install of DX9.0c (november) nessesary /Eisenfpferd/
babasior	#7 09/01/2009 - 14h27 Top
Class : Webmaster (admin) Posts : 930 Registered on : 09/07/2007 Off line Www	If you used/install more than one version of freetrack don't forget to register OCX, AX Filters : Go here : http://forum.free-track.net/index.php?showtopic=1474 Babasior. FreeTrack Online / www.Free-Track.net
germantracer	#8 14/01/2009 - 17h12 Top
Class : Apprenti Posts : 6 Registered on : 07/01/2009 Off line	Hello, thanx for your answers. My Freetrack is working now really great. Ive uninstalled both Versions and installed the v2.1 after that. This is running great now. Additionally ive installed the IR-LEDS at my headset.

FreeTrack Forum > FreeTrack : English Forum > General Discussion > Problem with Freetrack

> Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).