FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > Your point model constructions

Pages (16): (<<)... 9 - 10 - [11] - 12 - 13 ...(>>)

RSS > Your point model constructions, Share pics and details

Strassenkater	#151 29/11/2010 - 13h11 Top
Class : Apprenti Posts : 2 Registered on : 24/11/2010 Off line	It's ugly but it's working perfectly with a Logitech C300. http://forum.free-track.net/index.php?showtopic=39&message=14914 It was a quick shot, because i was very curious and eager as i never used a headtracker before. The next one will look nicer. Edited by Strassenkater on 29/11/2010 at 17h55.
baloo	#152 17/01/2011 - 21h57 Top
Class : Apprenti Posts : 1 Registered on : 17/01/2011 Off line	hello After many hours reading forums and other sources, finally I managed a system that works quickly and efficiently in my flight simulator. The point is done by hand with alluminium tube and wod box glued with cyanocrilate. The diodes are cut and polished to increase the field view and are connected in parallel with 7ohms resistance and connect to usb The camera is a PS3eye with handmade plywood support. The IR filter was removed and with a screen made with a cutting old Iomega disk It works perfectly with a resolution of 640x480 and a refresh rate of 75fps and 0 jitter Edited by baloo on 17/01/2011 at 22h02.
Volans	#153 17/01/2011 - 23h27 Top
Class : Apprenti Posts : 39 Registered on : 14/11/2007 Off line	9v and 2.4v powered clips....hard to make a choice! Edited by Volans on 17/01/2011 at 23h29.
Volans	#154 22/01/2011 - 23h20 Top
Class : Apprenti Posts : 39 Registered on : 14/11/2007 Off line	Well, mass production! :) ..still unfinished (to be painted and power source added)
Anaguma	#155 23/01/2011 - 08h12 Top
Class : Apprenti Posts : 1 Registered on : 23/01/2011 Off line	Edited by Anaguma on 23/01/2011 at 08h16.
KosiMazaki	#156 25/01/2011 - 18h54 Top
Class : Apprenti Posts : 2 Registered on : 08/01/2011 Off line Www	Hi everybody This is my first post here and I decided to show you my clip construction that made last weekend. 3x IR leds TSAL7600 2x 10 Ohm resistor + universal box, steel bar, some wires and old USB cable The whole building cost is about 5$ for each Ps. Forgive me my poor english :). Ps2. Can somebody PM me his FT settings for MS VX-3000? Need some help with configuration :).
fael097	#157 26/01/2011 - 11h40 Top
Class : Apprenti Posts : 6 Registered on : 25/01/2011 Off line	guys, where can i find ANY information, on what led lights to buy?! i have no idea on what to do, how to assemble this.
Fear Factory	#158 01/02/2011 - 20h14 Top
Class : Apprenti Posts : 5 Registered on : 28/01/2011 Off line	@fael097 Look at mainpage and you will find a Freetrack-Handbook. Ther´s all what you need. btt Here is my Setup For more informations you can look here: http://forum.free-track.net/index.php?showtopic=2829 greetings
KosiMazaki	#159 07/02/2011 - 19h55 Top
Class : Apprenti Posts : 2 Registered on : 08/01/2011 Off line Www	Today i have ended work on clip for my good friend and it look's like this::
tracker	#160 11/02/2011 - 13h35 Top
Class : Apprenti Posts : 26 Registered on : 09/10/2010 Off line	New power source for my pcb freetrack with lm317 as a constant current source. It's a 5V battery charger for Sagem mobile phone. It has 9V when not connected and 7,7V with connected freetrack device (50mA). It's small and works well.
OZELIO	#161 21/02/2011 - 01h09 Top
Class : Apprenti Posts : 8 Registered on : 18/02/2011 Off line	My model: lolo 3 point clip lolo freetrack gun: lolo freetrack machine gun Visit: http://forum.free-track.net/index.php?showtopic=2848&page=1#15324 http://www.youtube.com/watch?v=yMbEh1-RnfE
Talonslair	#162 08/04/2011 - 22h23 Top
Class : Apprenti Posts : 1 Registered on : 08/04/2011 Off line	My 3 point cap. It is mounted on a binder clip so it can be used with any cap. It is powered by a 6v power supply. Edited by Talonslair on 08/04/2011 at 22h57.
Dwit	#163 10/04/2011 - 19h05 Top
Class : Apprenti Posts : 5 Registered on : 15/02/2011 Off line	My 3point clip: Edited by Dwit on 10/04/2011 at 19h18.
MajMata	#164 15/06/2011 - 01h01 Top
Class : Apprenti Posts : 2 Registered on : 15/06/2011 Off line	What is the disadvantage of a one LED system?
jangeisler	#165 16/06/2011 - 05h43 Top
Class : Apprenti Posts : 4 Registered on : 14/06/2011 Off line	I think it affects the number of axis. As I understand, 1 point tracking tracks pitch and roll (looking up/down and left/right, where 3 point tracking tracks 6 axis. Same as 1 point tracking + moving sideways, up/down, back/forth and roll. This is because the cam can calculate exact head position by the distance between, and the position of the points