FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS >  3 point clip vs 3 point cap
espurr #1 03/07/2014 - 06h30

Class : Apprenti
Posts : 7
Registered on : 02/07/2014

Off line

hey everyone,

i want to build my own head tracker, but i dont know if i want to build a clip or cap version.
what are the pro's and cons off these two versions?

Thanks in advance!  :D
Stormrider #2 03/07/2014 - 17h36

Class : Légende du Forum
Posts : 466
Registered on : 02/01/2013

Off line

the cap model you can use with or without your headphone, you only need to wear a cap.
I started with a clip-model, now I only use a cap-model.The cap-model gave me less problems with filling in the right dimensions where it is placed.
The leds and resistor does't cost that much, maybe make both models and see for yourself what works better/easier.
espurr #3 04/07/2014 - 06h19

Class : Apprenti
Posts : 7
Registered on : 02/07/2014

Off line

i have taken some time to research and looking for parts i can use.

i came up with these components.

3 ir leds: http://www.conrad.nl/ce/nl/product/153831/Osram-Components-SFH-485-P-IR-emitter-880-nm-40-5-mm-Radiaal-bedraad

1 webcam: http://www.conrad.nl/ce/nl/product/990561/LogiLink-USB-webcam-met-LED

3 copper wires: http://www.conrad.nl/ce/nl/product/1082851/Koper-schakeldraad-Zwart-Per-meter-BKL-Electronic

also i want to use my samsung galaxy s3 usb charger with a old usb cable.
the output is 5v AC 1A.
i have calculated the resistor that i need to use, but i dont know if i calculated it correctly.
here are the screens.

Posted Image
Posted Image

can somebody check the numbers for me  :D

Thanks in advance!
Edited by espurr on 04/07/2014 at 06h21.
Jaeger55 #4 04/07/2014 - 11h38

Class : Apprenti
Posts : 21
Registered on : 10/09/2010

Off line

I built both versions and I found the Cap/visor style better.
espurr #5 04/07/2014 - 12h40

Class : Apprenti
Posts : 7
Registered on : 02/07/2014

Off line

Jaeger55 @ 04/07/2014 - 13h38 a dit:

I built both versions and I found the Cap/visor style better.



Why? do you have better visibility?
Stormrider #6 04/07/2014 - 13h29

Class : Légende du Forum
Posts : 466
Registered on : 02/01/2013

Off line

clip is most of the time mounted on your headphone, so you need to wear it when you play.A lot of people built both models so they can choose.
Why do you choose that webcam with leds?Iam not sure if it is a good choice for ir-tracking.
Edited by Stormrider on 04/07/2014 at 13h43.
Jaeger55 #7 05/07/2014 - 02h10

Class : Apprenti
Posts : 21
Registered on : 10/09/2010

Off line

I have a really light weight headset with a mic. Adding the clip style just felt kinda heavy to one side.  I suppose if I would have just stuck with it I would  have gotten used to it.
Steph #8 05/07/2014 - 15h37

Class : Moderator
Posts : 656
Registered on : 16/11/2007

Off line

Hi,

your samsung galaxy s3 usb charger is a regulated power supply.
Going for a 10 Ohm resistor will be better.
espurr #9 06/07/2014 - 12h15

Class : Apprenti
Posts : 7
Registered on : 02/07/2014

Off line

Steph @ 05/07/2014 - 17h37 a dit:

Hi,

your samsung galaxy s3 usb charger is a regulated power supply.
Going for a 10 Ohm resistor will be better.



With how many watts? 1, 2, 3, 5 or 7W?
Steph #10 06/07/2014 - 14h35

Class : Moderator
Posts : 656
Registered on : 16/11/2007

Off line

According to what you have mentioned.

5V x 1A =  5W

espurr @ 04/07/2014 - 07h19 a dit:


also i want to use my samsung galaxy s3 usb charger with a old usb cable.
the output is 5v AC 1A.



But don't care about, with a 10 Ohm resistor your serial circuit current is about 50mA that dissipate 0.03W power.
No problem for this charger.
espurr #11 09/07/2014 - 06h42

Class : Apprenti
Posts : 7
Registered on : 02/07/2014

Off line

i made my cap frame, now waiting for my leds and playstation 3 eye webcam.

Posted Image

 >  Fast reply

Message

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).