FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS >  Findind SFH485P in the US?
Remyx #1 22/10/2007 - 19h04

Class : Apprenti
Posts : 2
Registered on : 22/10/2007

Off line

Hi,

I'm looking for a place to order the IR LEDs from in the US. All the distributors I'm come across have a $250 min per order. A bit steep for 4 LEDs :-)

Any address you can share?

If not, any place in europe that would ship international?

Thank you,
Remy
HugoC #2 22/10/2007 - 19h59

Class : Apprenti
Posts : 4
Registered on : 07/10/2007

Off line

Avnet Electronics Cust. Services: 1-800-408-8353
http://www.avnet.com/
-->Component Part Search:  SFH485P : $0.3480 each, no minimum I think, $8 handling fee + $?? for shipping.

DigiKey  Cust. Services: 1-800-DIGI_KEY
http://www.digikey.com/
But you can only make a search with SFH485 (without the final P)
$0.57 each, no minimum, $5 handling + $?? for shipping.

In both instances, it seams they are rounded head, not flat as what is described here.

Could be wise to contact them before committing.

Hope it helps,

HugoC

Note: Could you make a follow-up on what you found and the total pricing please?
Iceburg #3 10/11/2007 - 00h51

Class : Apprenti
Posts : 2
Registered on : 10/11/2007

Off line

The SFH485P from AVNET are the correct ones. They are the flat top.
Deimos #4 10/11/2007 - 14h09

Class : Beta Tester
Posts : 120
Registered on : 07/11/2007

Off line

If you find it hard to find these leds you might try buying standard dome-tipped leds and use a file or sandpaper to cut their top flat. That's what i did and it works like a charm:
Posted Image
Even from the side the LED's light is visible to the camera.
Also, don't try to polish the top of the led once it is flat - if it is matte, it will disperse the light, making it visible from even greater angles.
Edited by Deimos on 10/11/2007 at 14h10.

 >  Fast reply

Message

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).