FreeTrack Forum
FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > Webcam compatibility feedback
Ronan | #106 03/09/2008 - 23h56 |
Class : Apprenti Off line |
Logitech Quickcam OK
Apple iSight (the on inside a macbook pro 3.1) doesn't work. I get half a picture at about 2 fps (sometimes spf), if I select mjpeg @ 60 The top half of the picture is the normal output and the bottom half has been processed by FreeTrack (red and black). And if I try with anything else than mjpeg, FreeTrack crashes. From windows event log : Type de l'événement : Erreur From what I read on the web :
So it may very well be the cause of the problem... Edit : works with SplitCam... but takes a full 30% of the CPU on a core 2 duo 2.2GHz And the information about SplitCam was a bit burried into the forum, it should IMHO be on the webcam compatibility page
Edited by Ronan on 04/09/2008 at 00h08.
|
nilsca | #107 15/10/2008 - 15h41 |
Class : Apprenti Off line |
|
mcurty | #108 16/10/2008 - 11h58 |
Class : Apprenti Off line |
hey everybody,
the LOGITEC QUICKCAM FOR NOTEBOOKS works fine after you put a little piece of a negative on the lens. Price: about 18 euro greetings mcurty |
svet-am | #109 22/10/2008 - 01h20 |
Class : Apprenti Off line |
Are there recommendations on the best webcam to use that is compatible with 64-bit Vista?
While I am trying to be a bit frugal (otherwise, I'd just buy a TrackIR), I don't want to waste time with a crappy webcam. So, best bang-for-buck recommendations on Vista 64? thanks! |
lavida | #110 23/11/2008 - 00h27 |
Class : Apprenti Off line |
Saitek w300 web cam doesnt work with new 2.2.0.279 freetrack version, but it works greatly with v2.1 . Full 30-31 fps all the time and jitter between 0 or 1.
With new version i cant get camera properties windows with details about my camera |
didja | #111 23/11/2008 - 11h10 |
Off line Www |
Try to tweak it using amcap ( Start, Execute, "amcap.exe", Enter). Rémy |
binhex | #112 05/12/2008 - 19h26 |
Class : Apprenti Off line |
iSight on macbook pro (late 2006, core 2 due 2.16ghz) works great in low light after some settings tweaking.
I was too lazy to go out and buy some leds so i just put a red piece of plastic over an led headlamp I own, and it worked! |
MAXHO | #113 09/12/2008 - 07h27 |
Class : Apprenti Off line |
Please add theese cams as INCOMPATIBLE:
Genius EYE 320 - cannot change camera settings even with EnBtn. - only YUY2 stream. - 30 FPS can be acheived only with very good illumination. Genius i-Slim 330 - cannot change camera settings even with EnBtn. - YUY2 and MJPG stream. - 30 FPS can be acheived only with very good illumination. Theese cams are Plug&Play both. It seems Plug&Play cams cannot be tweaked manually?
Edited by MAXHO on 09/12/2008 at 07h30.
|
MAXHO | #114 10/12/2008 - 00h29 |
Class : Apprenti Off line |
Logitech QuickCam E 2500
Works perfectly with FreeTrack. 30 FPS, 0-1 Jitter, manual focus, tweakable other settings. It seems there is no built-in IR filter, works well with IR lights. Thanks for FreeTrack! =)
Edited by MAXHO on 10/12/2008 at 06h44.
|
SixIron | #115 20/12/2008 - 22h24 |
Class : Apprenti Off line |
MS VX3000, $29 CircuitCity
Works fine without any filter removal or added film filter modifications. Works in normally lighted room even with some sunlight from window. Used Enabler to uncheck auto exposure. Had to fool camera with white paper to get FPS to max at 30. and then save configuration. Using Radio Shack Hi Intensity I/R LED's, 1.2v 100ma, sanded flat. 30 FPS, 0-5 jitter |
whatmi | #116 30/12/2008 - 15h46 |
Class : Apprenti Off line |
Sorry, I think I was supposed to post this into this topic, not the one I had originally:
I have setup my PS3 eyetoy on my PC with FreeTrack. I have the directshow capture support working, and my eyetoy shows up in FreeTrack. BUT, on the camera tab, when I click show, I get "traditional" looking video, with no tracking points. The threshold slider does nothing. By comparison, when I use my Logitech camera, the video is bichromatic red and gets lots of little targetting crosses. Is this a) An issue with MY system/camera. b) An issue with FreeTrack/PS3 eyetoy interaction. Has anyone gotten the eyetoy working? Has anyone had similar problems with a different camera? |
imentec | #117 11/01/2009 - 01h58 |
Class : Apprenti Off line |
Hi,i'm writing from spain.
I bought a webcam TVISTO model tvtacm330 in Carrefour and it cost 12€. It has only rgb,autoexposure can be disabled,... I have built a 3 red leds(1.2 v 20mA) cap and .......IT WORKS GREAT!!! yuhuu!! (2xbatteries 1.5 v) Firstly,i only was able to reach 4 frames(ouch!) ,but i disabled an option(i dont remember the name)which was set to 50 hz to none and i reach 30frames.(0-5 jitter) Works in dark room,and with lightened room. I played rfactor very well.
Edited by imentec on 11/01/2009 at 12h45.
|
whoodie | #118 12/01/2009 - 16h04 |
Class : Apprenti Off line |
Microsoft VX-3000 works great. There are a few dead pixels on the sensor, other than that it works just fine.
I am using 3 layers of exposed photo film as the filter. The radio shack part numbers for the LEDs are: 276-0143 - High-Output 5mm Infrared LED 33 Ohms in resistors 5 volt cell phone charger Everything works awesome. Big thanks goes to the developers for making this happen, you deserve a beer! |
optocus | #119 13/01/2009 - 09h04 |
Class : Apprenti Off line |
As somebody said before me, Genius EYE 320 is incompatible with FreeTrack. It has a nice picture but unless you have a huge amount of light you won't reach anything near 30FPS. In FreeTrack I get 3FPS.
It seems that most Plug 'n' Play cameras that don't need drivers are YUY2 and lack manual controls for exposure. Wish I didn't let myself carried away and done the proper research before buying. No I'll go buy a MS VX1000. |
Fu®io | #120 13/01/2009 - 22h50 |
Class : Apprenti Off line |
Logitech Quickcam Express work slowly, only 15FPS (old PID). Avoid it.
Edited by Fu®io on 13/01/2009 at 22h51.
|
FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > Webcam compatibility feedback
> Stats
2 user(s) connected during the last 10 minutes (0 member(s) and 2 guest(s)).
Powered by Connectix Boards 0.8.4 © 2005-2024 (8 queries, 0.022 sec)