|
Class : Moderator
Posts : 656
Registered on : 16/11/2007
Off line
|
Hi,
for Il-2:
look in the conf.ini file for the line:
trackIRUse=1
has to be 1 to activate tracking.
To use full 6DOF you need a mod (like UltraPack, Hsfx, or so)
Check Freetrack- and TrackIR-Interface in the "Output" section.
Normally when Freetrack is started and minimised it will be active in the game without any other manipulations.
1. Do you set up the model dimensions and positions in the "Model" section?
2. It's quit normal to have some difficulty to find the right positions and movements for the tracking at the beginning. You will need about one week for the right behaviour and to adjust your settings. Setting some large deathzones and low sensitivity could be helpful on your first flights.
Edited by Steph on 25/10/2012 at 14h04. |
|
Class : Apprenti
Posts : 14
Registered on : 22/10/2012
Off line
|
Thx for your help Guys! I choosed some Medium Deadzones in Il2-1946 and started Free-Track First and now everything works as intended. Have to get a Feel for it first but it definatly works for me.
Now i have to adjust the Settings.
Is it working exactly the Same way in COD? Config.ini edit and then start Freetrack before COD? Will test that and report here.
Thx for all the Help here!
|