|
Class : Apprenti
Posts : 9
Registered on : 10/02/2013
Off line
|
Yes, Just install fresh new copy Win8 and flight sim X also i had installed freetrack and Mircosoft VX-1000 webcam but when I go to start the freetrack program after select from drop down menu from demo mode I select "Mircosoft VX-1000" then I click start from there a error tab pop-up say "FreeTrack has stop working.EXE" close freetrack program boot's itself out, I had try a few time more keeping on say same the over and over. This is my first time using freetrack I have purchase everything i need to have this working (1) webcam, (1) party finger ir led light's 5 finger light's per pack, (1) usb 2.0 cable, (1) 5 pack resistor, (1) solder roll, (1) roll wr=ire heatshink for little under $25.00 U.S. from ebay. I have read a few posting on freetrack form say there are fix but I haven't seen a fix for my webcam Mircosoft VX-1000 if someone can show me or link me to a page give me the 1-2-3 step thank would be great. Please help me if you have time! Thank you a bunch!
|
|
Class : Apprenti
Posts : 9
Registered on : 10/02/2013
Off line
|
ok I fix it read a post that say choose your web cam "click stream click ok click start" then wa-la & it work a "ok" great job great posting.
Now since I have that working, i have ran into thie i had hard time adjusting my single ir led party light, i spent 2 hour touching every setting with no help, can someone show me the step by step how to set setting correctly i'm to new at this. Please help someone.
|
|
Class : Apprenti
Posts : 1
Registered on : 06/04/2013
Off line
|
Hello,
Are sure that your problem is not caused by incompatibility of Software Freetrack with windows higher than Windows XP 32 bits and Vista 32bits.
If i do not make a mistake,i belive that compatibility mode of Windows 64 bits, is limited at Windows Seven 64 bits versus WinXP and Vista 32 bits.
|