FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS >  Wiring Led's *Help*
StayMetalxD #1 08/12/2011 - 07h14

Class : Apprenti
Posts : 3
Registered on : 08/12/2011

Off line

Can any of you guys show me the easiest & quickest way to wired the three Led's ? I'm a total noob when it comes to this & im stuck    :(
StayMetalxD #2 08/12/2011 - 07h52

Class : Apprenti
Posts : 3
Registered on : 08/12/2011

Off line

anyone ? if anything can anyone give me a list of things i need to buy ?
Steph #3 08/12/2011 - 12h49

Class : Moderator
Posts : 656
Registered on : 16/11/2007

Off line

Hi,

yes, I can show you the thread to read: ;)

http://forum.free-track.net/index.php?showtopic=1856

there are many others, depending on what mount you want to get.
Take a little time for reading the docs could be helpfull to.
And of course you will find help for specific problems in the forum.
Edited by Steph on 08/12/2011 at 12h51.
StayMetalxD #4 08/12/2011 - 14h17

Class : Apprenti
Posts : 3
Registered on : 08/12/2011

Off line

Okay thx XD

I just wanted to add, is the resistor really needed ? if so i don't mind breaking a few electronics apart to take them out, but if so than wish electronics ?
Edited by StayMetalxD on 08/12/2011 at 14h20.
Steph #5 09/12/2011 - 09h47

Class : Moderator
Posts : 656
Registered on : 16/11/2007

Off line

I just wanted to add, is the resistor really needed



Yes, you need it. And it's quit cheaper to bye them on the net or in a store, then plundering your brand new home cinema or grandma's radio. ;)
Not sure also, you find the right value there. Most of the actual microelectronics are soldered directly on circuit boards, makes it hard to recover them.
Have a look at older radios and power supplys, perhaps with a little luck...

You can get them for less than 10cents and by the way you can get the right IR-leds that you certainly don't find  elseway. (Than in the remote control of your home cinema) :)

 >  Fast reply

Message

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).