FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > Wireless 3-point model from RS-120 headphones

RSS >  Wireless 3-point model from RS-120 headphones
dracheschreck #1 23/08/2010 - 04h19

Class : Apprenti
Posts : 2
Registered on : 23/08/2010

Off line

Hi, I'm going to attempt a setup based on my wireless headphones (Sennheiser RS-120).

The idea is to directly leech power from the onboard batteries and still be cable-free when playing. Also these headphones are recharged easily by putting them on the recharging stand, I intend to keep that feature.

I'll update this post when I open up the headphones, but if you have any info, please share.
nadrealista #2 24/08/2010 - 10h22

Class : Habitué
Posts : 84
Registered on : 13/01/2010

Off line

Nice idea.

NiMH batteries are 1.2V not 1.5V
slaver1 #3 24/08/2010 - 10h48

Class : Apprenti
Posts : 49
Registered on : 08/02/2010

Off line

I have a set built in a similar style, but based on the old headphones THOMSON WHP520. Power 2xAAA batteries internally. A set works about 5 hours (sound and LEDs). I have not tried to load from the battery charger supplied with the headphones because I fear burn LEDs :pirate:
dracheschreck #4 07/09/2010 - 17h33

Class : Apprenti
Posts : 2
Registered on : 23/08/2010

Off line

I'm back, made some advances.

I measured the voltage on the battery terminals while charging and while not charging. Charging will rise the voltage by .1 or .2 V at most, so it won't burn my leds.

I soldered a connector to the battery terminals and glued it to the side of the headphones, the next step is to build the 3-point piece so that I can connect it or disconnect it at will.

I couldn't get a hold of those famous irleds so i'll just shave off some normal ir leds to improve the angle.

Posted Image

 >  Fast reply

Message

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > Wireless 3-point model from RS-120 headphones

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).