FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS >  LED's aren't lighting up
CadillacShane #1 12/09/2009 - 19h21

Class : Apprenti
Posts : 15
Registered on : 12/09/2009

Off line

Hey everyone,

So, this is my first attempt at creating this system.  I'm having an issue getting the lights to power on and I need a little assistance.

First, here is the spec sheet:

Posted Image


Here are the parts that I used:

x3 (5mm Wide-Angle Red LED: 1.7v 20mA 800mcd)
http://www.radioshack.com/product/index.jsp?productId=2102849

x1 (47-Ohm Resistor)
http://www.radioshack.com/product/index.jsp?productId=2062313

x1 ("AA" Battery Power Supply 4AA battery power and on/off switch)
http://www.radioshack.com/product/index.jsp?productId=2062253&tab=summary

And I cut up some PCB to mount the resistor and the LED's
http://www.radioshack.com/product/index.jsp?productId=2104052

So I got everything wired up and soldered according to the "series" specifications in the diagram.

I cannot see any light emitting from the diodes when I switch on.

I got a very weak light in the center of one of the LED's when I direct connected the PS to it.

Looking for some help.  Did I miss something?  Is the Amperage wrong

Thanks in advance,

~S
DrSnow #2 15/09/2009 - 20h56

Class : Apprenti
Posts : 39
Registered on : 11/08/2008

Off line

I got a very weak light in the center of one of the LED's when I direct connected the PS to it.



Are you sure that your leds are connected right (every led in same way polarized)? I suggest you check the polarization and soldered joints first...

Snow
CadillacShane #3 15/09/2009 - 23h08

Class : Apprenti
Posts : 15
Registered on : 12/09/2009

Off line

I had done the math wrong for the resistor and blew them out almost immediately!.  lol

Remember kids, do the math first, and make sure it's right!!!

http://www.kpsec.freeuk.com/components/led.htm#calculate
senna86 #4 16/09/2009 - 16h11

Class : Apprenti
Posts : 5
Registered on : 16/09/2009

Off line

.
Edited by senna86 on 16/09/2009 at 16h26.

 >  Fast reply

Message

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).